|
Summit
R Series Summit
R Series synthetic
hydrocarbon refrigeration lubricants are designed to function
under severe service conditions.
These fluids have a very high viscosity index, contain no
paraffin and are compatible with various fluorinated refrigerants,
ammonia, methyl chloride and carbon dioxide. The Summit
R Series are completely miscible with petroleum-based fluids. These
products are USDA H-1 approved and have Kosher approval.
R-100
is designed to operate in rotary compressors requiring an ISO-32
viscosity rating.
R-200 is designed to operate in rotary screw compressors requiring
an ISO-68 viscosity rating.
R-300 is designed to operate in reciprocating compressors requiring
an ISO-100 viscosity rating.
Top of page
Summit
RAB Series
Summit
RAB Series
refrigeration oils are alkylate based and formulated for use in
reciprocating, rotary, and centrifugal refrigeration compressors
using ammonia, R12, R22, R114 and R502.
These products are extremely stable at high compression
temperatures while providing excellent low temperature properties
at evaporator temperatures below -50°F.
Other performance benefits include excellent solubility
with refrigerants, good compatibility with construction materials,
extended service life , and reduced deposit formations in high and
low temperature areas.
Applications:
Refrigeration
compressors using ammonia, R12, R22, R114, and R502 as the
refrigerant. Compatible
with conventional mineral oils and most construction materials
including Viton®, Neoprene®, and Buna-N.
Available
as: RAB-32 and RAB-68
Top of page
Summit
RHT-68
Summit
RHT-68
is a highly refined, hydrotreated ammonia compressor lubricant specially
designed to function under the stringent requirements of
closed-loop ammonia refrigeration systems.
Besides providing value-added benefits in the areas of
improved system efficiency and higher productivity, the
performance advantages of Summit
RHT-68 versus
naphthenic oils include:
Summit
RHT-68 is exceptionally well suited for rotary screw, reciprocating and rotary
vane compressors in ammonia service.
It is compatible with naphthenic and other hydrotreated
paraffinic-based compressor oils for ammonia service, as well as
PAO and alkylbenzene-based products.
It is compatible with all seal elastomers commonly used in
these systems including Buna-N, Neoprene and Fluorocarbon (Viton®).
Due to swelling, softening and rapid deterioration of Neoprene seals in
the presence of naphthenic oils, it is strongly recommended that
these seals be replaced before changing to Summit
RHT-68.
Top of page
Summit’s
RPA Series
Summit’s RPA Series
is a synthesized hydrocarbon-alkylate 100% full-synthetic
formulation for reciprocating, rotary, and centrifugal
refrigeration compressor applications using any of several
refrigerants including ammonia (R717), R12, R13, R22, R113, R114,
R123, R401A, R401B, R402B, R409A, R500, R502 and R503.
Summit RPA Series
is not compatible with R134A and most HFCs.
This product is extremely stable at higher compression
temperatures while providing excellent low temperature properties
at low evaporator temperatures.
Performance and cost benefits include:
-
Reduced
and easier oil draining from the plant
-
Reduced
oil consumption- Up to 70% less vs. mineral oils
-
Reduced
deposit formation & low foaming tendency
-
Excellent
seal, paint & plastic compatibility
-
Extended
lubricant service life- Up to 5 times longer vs. mineral oils
-
Chemically
stable in the presence of normal levels of water and air
-
Extended
lubricant service life vs. Mineral oils
Available
as: RPA-32, RPA-46, RPA-68, RPA-100
Summit's
R
P E Series
Summit’s
RPE Series are fully
synthetic lubricants designed for use in refrigeration compressors
using R-134A as the
refrigerant. They
have excellent chemical and thermal stability as well as superior
lubricity characteristics with steel and aluminum. They are also miscible with all HFCs, HCFCs, CFCs and blends.
They were specifically developed for HFC refrigerants.
Available
as: RPE-32, RPE-46,
RPE-68, RPE-100
Top of page
The information contained in this document is the result of
careful testing in our laboratories, complemented by selected literature. It does not in
any way constitute a guarantee, nor does it serve as a license to operate any patent. Due
to widely varying conditions of product use, which are beyond our control, it is strongly
recommended that the product be tested for suitability.
Viton®
is a registered trademark of DuPont Dow Elastomers.
|
