|
Summit SH® Series lubricants are manufactured from the highest quality
synthetic hydrocarbon base-stocks and advanced additive technology.
SH® Series
lubricants are recommended for rotary screw, centrifugal, and reciprocating compressors
and offer many advantages over petroleum-based lubricants as well as some synthetics -
especially where compatibility is an important concern. The SH® Series
lubricants have low pour points, high viscosity indexes and excellent water demulsibility.
Summit SH® Series lubricants are
compatible with commonly used seal materials and equipment designed for use with petroleum
oils.
Summit SH® is recommended for use
in the following applications:
-
Centrifugal compressors
-
Rotary screw and vane compressors
-
Ball and roller bearings
-
Low temperature lubrication
-
High temperature lubrication Available as: SH® -32, SH® -46, SH®
-68, SH® -100, SH® -150
Top of page
Summit DSL® synthetic lubricants are unique combinations of quality diester
base-stocks and the latest additive technology. Summit provides a wide range of DSL®
lubricants that cover applications for rotary vane, rotary screw, and all ages and
design-types of reciprocating compressors. Summit DSL® lubricants
are especially noted for the following benefits:
-
Low temperature fluidity
-
Better thermal conductivity
-
Reduced friction
-
High temperature thermal stability
-
Greater resistance to mechanical stress
-
Reduced metal-to-metal wear.
Summit DSL® Lubricants are formulated to
keep compressors free of varnish and sludge build-up while extending drain intervals to
8000 hours.
Summit DSL® lubricants are
compatible with almost all elastomers used in compressors and pumps including the paint
used in crankcases.
Summit DSL® is recommended for
use in the following applications:
-
Centrifugal Compressors
-
Certain rotary screw and vane compressors
-
Low temperature lubrication
-
High temperature lubrication
Available as DSL®-32,
DSL®-46, DSL®-68,
DSL®-100, DSL®-125, DSL®-150
Top of page
Summit Lubricant-Coolant® is formulated from the best diester base stocks available and
employs state of the art additive technology to provide an outstanding lubricant and
coolant. Lubricant-Coolant is an excellent lubricant for the applications listed
below.
Summit Lubricant-Coolant® is recommended
for use in the following applications:
-
Rotary screw and vane compressors
-
Ball and roller bearings
-
Low temperature lubrication
-
High temperature lubrication
Top of page
Summit FG Series lubricants are
specially designed for rotary screw, vane and reciprocating compressors being used in the
food service industry. These lubricants are approved by the USDA for H-1 application
(lubricants with incidental food contact) and comply fully with the requirements of FDA
21CFR 178.3570.
The FG Series lubricants are formulated from the
highest quality synthesized hydrocarbon fluids available. The special additive system is
blended with the synthetic base-fluid to provide extended lubricant life and to protect
against wear, rust and corrosion. FG Series lubricants are extended life lubricants
and have the same software compatibility as Summit SH® Series
lubricants.
FG-100 is designed for use in rotary screw
compressors and applications requiring an ISO-32 lubricant. FG-200 is designed for
use in rotary screw compressors and other applications requiring an ISO-68 lubricant. FG-300
and FG-500 are designed for use in reciprocating compressors, rotary vane
compressors and other applications requiring an ISO-100 lubricant.
Available as: FG-100, FG-200, FG-300, FG-500
All grades are Kosher approved.
Top of page
Summit Supra-32
and
Supra
Coolant® have been formulated to
address the specific problems associated with conventional rotary screw compressor
coolants: thermal degradation and deposit formation. The polyglycol/ester blend provide
superior performance in the areas of oxidation resistance and deposit formation.
Supra
32 and Supra Coolant® eliminate the varnish, sludge and frequent
lubricant changes associated with hydrocarbon oils.
Top of page
Summit Ultima is a high performance
lubricant formulated specifically to outperform other synthetic rotary compressor
lubricants on the market. Ultima employs a unique base stock that allows
improvements in oxidation resistance and sludge and deposit formation over conventional
synthetic base stocks. It is also compatible with existing
O.E.M. provided lubricant.
Available as: Ultima, Ultima 68
Top of page
Summit PS Series synthetic
lubricants are a blend of synthetic and petroleum base fluids specially designed for
compressor applications as well as multi-purpose applications. The PS Series is
manufactured using the highest quality base stocks, additive treated with rust and
corrosion inhibitors, oxidation control agents, anti-wear compounds and defoamants and is
exceptional at controlling sludge and deposits.
Summit PS is recommended for use in the following
applications:
-
Rotary screw and vane compressors
-
Ball and roller bearings
-
Low temperature lubrication
-
High temperature lubrication
-
Mist lubrication systems
Available as: PS-100, PS-150, PS-200, PS-300, PS-400
Top of page
Summit
SBL
synthetic lubricants are formulated to provide maximum
lubrication protection and service for all positive
displacement blowers including Roots, Gardner-Denver,
Sutorbilt, Duroflow and MD.
Advantages over petroleum lubricants include extended
lubricant life (up to 8,000 hours with oil analysis),
reduced operating temperatures, better corrosion protection,
enhanced low and high temperature lubricating properties,
longer blower life with reduced wear, and lower maintenance
costs. The SBL synthetic
lubricants exceed the specification requirements for all of
the major manufacturers of positive displacement blowers and
are compatible with most commonly
used seal materials. In applications where food contact
might occur, the Summit SBL-220F
and SBL-320F
meet the requirements of FDA21CFR 178.3570 and are Kosher
approved. Available
as: SBL-220, SBL-320, SBL-220F, SBL-320F
Top of page
Summit TM Series is formulated from
highly refined petroleum base stocks and the unique additive
Syntholate. The refining
process includes catalytic hydrogenation to remove impurities, M.E.K. solvent dewaxing to
provide low pour points and vacuum distillation to assure low vapor pressure. The addition
of Syntholate inhibits the formation of varnish and carbon and provides superior thermal
and oxidative stability. Utilizing the superior petroleum base stocks fortified with
Syntholate extends the life of the Summit TM Series compared to that of
conventional mineral oils and provides the following money saving benefits:
-
Reduced lubricant consumption - Extended drain intervals and lower vapor
pressures reduce lubricant consumption.
-
Reduced maintenance -Syntholate reduces carbon and varnish formation thus
extending valve life and the time interval between overhauls.
-
Eliminates recompression- Syntholate keeps the valves clean and eliminates the
primary cause of recompression.
-
Reduced power consumption - Elimination of recompression and reduced coefficient
of friction results in less power consumption per unit of compression.
-
Improved safety - Higher flash points provide a greater margin of safety in air
compression.
The Summit TM Series with Syntholate pays for itself
with the first lubricant change.
Available as: TM-10, TM-20, TM-30, TM-40
Top of page
Summit
AU-46
is a
silicone-based fluid designed for use in rotary screw compressors.
AU-46 does not breakdown under normal operating
temperatures and pressures thereby eliminating carbon deposits,
sludge and varnish formations. The system stays clean of
lubricant by-products resulting in lower maintenance costs. The
high viscosity index insures a minimum change in viscosity over
the compressor's temperature range. AU-46 has excellent
water separation, corrosion protection and lubricity
characteristics.
Top of page Summit Varnasolv
The use of petroleum lubricants, primarily automatic
transmission fluid (ATF), in rotary screw and rotary vane compressors results in the
formation of varnish and carbon. The varnish and carbon is deposited throughout the system
and can cause a number of serious operational problems, resulting in excessively high
maintenance costs.
Summit's Varnasolv can help alleviate the
problems caused by varnish and carbon. Varnasolv is designed to be used as an
additive in the lubricant to remove and suspend varnish while the compressor is in
operation. Using Varnasolv eliminates the need for disassembling the compressor for
cleaning. For maximum benefit, use Varnasolv prior to each lubricant change.
The information contained in this document is the result of
careful testing in our laboratories, complemented by selected literature. It does not in
any way constitute a guarantee, nor does it serve as a license to operate any patent. Due
to widely varying conditions of product use, which are beyond our control, it is strongly
recommended that the product be tested for suitability.
Top of page
Note: The information
contained in this document is the result of careful testing in
our laboratory, complemented by selected literature. It
does not in any way constitute a guarantee, nor does it serve
as a license to operate any patent. Due to widely
varying conditions of product use, which are beyond our
control, it is strongly recommended that the product be tested
for suitability.
|
